Stratos MAXO 30/0,5-12 PN10-R7 / 2217914 - Wilo New Zealand Sales

BRAND	Wilo
Product	Stratos MAXO 30/0,5-12 PN10-R7 / 2217914
Description	Centrifugal Pump
Internal code	IMP4592406
Technical specification	Premium smart pump Wilo-Stratos MAXO-R7 (R7 = without temperature sensor) High-efficiency inline glandless pump with EC motor and electronic power adjustment. Can be used for heating water, cold water and water/glycol mixtures. Energy efficiency index (EEI) between = 0.17 and = 0.19 depending on the pump type. Types of control: - Permanent, automatic performance adjustment to the system requirement without setpoint specification Wilo-Dynamic Adapt plus (factory setting). Up to 20% energy savings compared to the dp-v control mode. - Constant temperature (T-const.) - Constant differential temperature (dT-const.) - Needs-based volume flow optimization of the feeder pump through networking and communication with several pumps (multi-flow adaptation). - Constant volume flow (Q-const.) - Differential pressure control dp-c at a remote point in the pipe network (weak point control) - Constant differential pressure (dp-c) - Variable differential pressure (dp-v) with the option of entering the nominal operating point - Constant speed (n -const.) - User-defined PID control functions: - Heat quantity detection (possible with Wilo media temperature sensor accessory) - Cold quantity detection (with Wilo media temperature sensor accessory) - Automatic switch-off of the pump when zero flow is detected (No-Flow Stop) - Changeover between heating and cooling mode (automatic, external or manual) (automatic, with accessory Wilo media temperature sensor possible) - Adjustable flow rate limitation using QLimit function (Qmin. and Qmax.) - Double pump operating modes: efficiency-optimized addition operation for dp -c and dp-v, main/standby - save and restore configured pump settings (3 restore points) - St Error message/warning message display in plain text including recommended remedy - Ventilation function for automatic ventilation of the rotor chamber - Automatic night setback (with accessory Wilo media temperature sensor possible) - Automatic deblocking function and integrated full motor protection - Dry running detection Display: - control type - setpoint - volume flow - temperature (with Accessories Wilo media temperature sensor possible) - Power consumption - Electrical consumption - Active influences (e.g. STOP, no-flow stop) Design: - 2 configurable analog inputs: 0-10V, 2-10V, 0-20mA, 4-20mA and more commercially available PT1000; Power supply with +24 V DC - 2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, heating/cooling, manual override (building automation disconnected), operation lock (key lock and remote configuration protection)) - 2 configurable signaling relays for operation and fault messages - Slot for Wilo CIF modules with interfaces for GA building automation (optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CANopen) - Wilo Net as Wilo system bus for communication between Wilo products, eg multi-flow adaptation; Double pump operation and Wilo-Smart Gateway - Automatic emergency operation in special conditions (pump speed can be defined), e.g. if bus communication fails or sensor values - Graphic color display (4.3 inches) with operation via one-button manual operating level - Reading out and setting operating data as well as E.g. creation of a commissioning report via Bluetooth interface (without additional accessories) using the Wilo Assistant App - Integrated double pump management (double pumps are already wired), when using 2 single pumps as a double pump unit, connection via WILO Net - Cable break detection with analog signal (in connection with 2- 10V or 4-20mA) - Outdoor installation with weather protection possible in accordance with the installation and operating instructions - Date and time preset - Thermal insulation shell for heating applications - 5-year warranty Scope of delivery - Pump - Optimized Wilo connector for all sizes - 2x cable gland M16 x 1.5 - 2x seals - thermal insulation chale - Compact installation and operating instructions Optional accessories: - ClimaForm cold insulation to prevent condensation - CIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANopen - PT 1000 (B) pipe contact sensor (for domestic hot water) - PT 1000 (AA) sensor for installation in the immersion sleeve - differential pressure sensor - smart gateway - Wilo media temperature sensor (can be retrofitted for recording and displaying the media temperature, heat and cold quantity measurement and use of the temperature-controlled control types T-const., dT -const.) Operating data Pumped medium: Water 100% Medium temperature: 20.00 °C Requested flow rate: Requested head: Medium temperature: -10...90 °C Ambient temperature: -10...40 °C Maximum operating pressure: 10 bar Minimum inlet head at 50°C: 3 m Minimum inlet height at 95°C: 10 m Minimum inlet height at 110°C: 16 m Motor data Energy efficiency index (EEI): ≤ 0.19 Interference emission: EN 61800-3;2004+A1;2012 / residential area (C1) Interference immunity: EN 61800-3;2004+A1;2 012 / industrial area (C2) Mains connection: 1~230V/50 Hz Power consumption: 295 W Min. speed: 750 rpm Max. speed: 4350 rpm Motor protection class: IPX4D Cable gland: 5 x M16x1.5 Pump housing materials: EN- GJL-200 Impeller: PPS-GF40 Shaft: 1.4122, DLC-coated Bearing: carbon, antimony impregnated Installation dimensions Suction-side pipe connection: G 2, PN 10 Pressure-side pipe connection: G 2, PN 10 Overall length: 180 mm

Please Contact Us to Order to offer competitive prices and delivery time for Wilo - Stratos MAXO 30/0,5-12 PN10-R7 / 2217914 Centrifugal Pump number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in New Zealand Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.